Clutch kit

Please use the board to ask Tech questions about your bike. PLEASE KEEP THIS SERIOUS!!!

Moderators: Fireball, DONNY

Clutch kit

Postby Lukeee756 » Mon Mar 22, 2010 10:00 am

how do i change the clutch on a 2008 kx 250f
Posts: 14
Joined: Fri Aug 14, 2009 10:23 am
Location: savannah

Re: Clutch kit

Postby SonnyLynnVick75 » Wed Mar 24, 2010 11:50 am

drain the oil,Pull off the clutch cover then take out the pressure plate bolts and springs, remove the pressure plate, then begin taking off clutches, soak the brand new clutches in the oil you will be running in the bike for about 15 min. at least. the put the plates in alternating between metal and fiber plates. once all your clutches are in put the pressure plate on then put in the springs(i like to use new springs when i change clutches). then use your manual to see what torque the bolts should be at. then put the gasket and clutch cover on and adjust your clutch cable.
Posts: 123
Joined: Thu Oct 29, 2009 10:23 am

Return to Got a Technical question about your bike?

Who is online

Users browsing this forum: No registered users and 1 guest